TEMSİLCİLİKLER > ELECTROIMPACT >
Ürünlerimiz için daha detaylı bilgi almak veya teklif istemek için hasmak@hasmak.com.tr adresinden bize ulaşabilirsiniz

Hasmak
Halk Caddesi No 165
Bati Atasehir Kadikoy Istanbul
Tel: +90 216 688 3777
Fax: +90 216 688 3778
www.hasmak.com.tr
hasmak@hasmak.com.tr
satis@hasmak.com.tr

Composite Manufacturing

Electroimpact has developed Automated Fiber Placement (AFP) technology that allows cutting and adding within customer end placement tolerances at rates up to 2000 IPM over ramped, complex surfaces. All layups can be performed in a fully bidirectional manner with operator control over the feed rate with no effect on end cut accuracy.


The Electroimpact Modular Head AFP features:


Fully modular, quick change heads with 30 second automatic head change
Off line material loading for highest capital utilization
Off line cleaning for highest capital utilization
Allows multiple material forms on the same part (1/4” or 1/8” AFP in high contour areas, 1/2” or wider in low contour areas) for highest possible productivity
Simple, reliable 36” long tow path independent of machine configuration and reachable at ground level
Simple passive backing film removal
100% no-twist operation
100% no splice breakage
Fully bi-directional operation
Process and material use monitoring
Part specific machine designs possible with no impact on the core AFP technology or tow path
Programmed via VERICUT Composite Programming and Simulation Suite provided by CGTech


 

 

 

 

 

C-Series Wing Assembly

 

 

 

 

 

 

 

 

 

 

A380S1 Grawde

 

 

 

 

 

 

 

 

 

 

A380S1 Hawde

 

 

 

 

 

 

 

 

 

 

A400M Cawde

 

 

 

 

 

 

 

 

 

787 Side-of-Body

 

 


 

This is not an official ELEKTROIMPACT web site. This website is not endorsed or sponsored by ELEKTROIMPACT Hasmak A.S. is not affiliated with ELEKTROIMPACT. Any use of word ELEKTROIMPACT or other words/numbers registered by ELEKTROIMPACT are solely for reference.