Miniature Pressure Regulators Fairchild Industrial Products

Specialty Pressure Regulators

In addition to its standard products, Specialty Pressure Regulators, such as its Model 2400 Standard and Low Pressure series Motorized Regulators for automation, and the Model 2800 Plunger Regulator and Model 3400 Lever Operated Regulator, were developed by Fairchild for fast and convenient actuation.

Pneumatic Stainless Steel Regulator (M66)

The Fairchild Model 66 is a Stainless Steel Pressure Regulator for high performance applications with corrosive environments and/or high temperatures. The Model 66 Stainless steel housing and internals, along with its fluorocarbon elastomers are compatible with a wide range of corrosive materials and difficult operating environments. The Fairchild Model 66 pressure regulator will handle a 500 psi, 35 BAR maximum supply pressure and offers five (5) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa.

Motorized Pressure Regulator (MP2400)

The 24CC, 24CS, 24XC and 24XS M/P Converters are Motor Driven Pneumatic Regulators with motor assemblies enclosed in a commercial enclosure, typically used as automation regulators. The explosion proof motor and housing is coupled to a pneumatic regulator assembly to provide the desired operating pressure range for any application. The Fairchild MP2400 motorized regulator line will handle a 500 psi, 35 BAR maximum supply pressure and offers eleven (11) different set point pressure ranges from Vacuum-10 psi, vacuum-0.7 BAR, vacuum-70 kPa up to 2-100 psi, 0.15-7 BAR, 15-700 kPa.

Low Pressure Motorized Pressure Regulator (MP2400)

The Model 2400 M/P Low Pressure Converter is also a Motorized Regulator, however, this unit uses a larger diaphragm regulator as its pressure control device to facilitate high accuracy set point control at very low output pressures. The large diaphragm regulator attaches to the motor housing and provides precision control in three (3) available pressure ranges, from 0-20 in water column, up to 0-5 psi. In these configurations, the MP2400Low Pressure motorized regulator will handle a supply pressure up to 150 psi, 10BAR, 1000 kPa.

Plunger Operated Pressure Regulator (M2800)

The Fairchild Model 2800 Plunger Operated Regulator is designed for applications requiring more rapid set point adjustment over the pressure range of the unit than conventional control knob models. The Model 2800 pneumatic plunger regulator is recommended for use in a variety of applications where mechanical actuation is required, including control stations and test panels, and in construction machinery and industrial or oil rig control equipment. The Model 2800 pressure regulator will handle a 250 psi, 17 BAR maximum supply pressure and offers four (4) set point pressure ranges from 0.5-10 psi, 0.03-0.7 BAR, 3-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa.

Lever Operated Pressure Regulator (M3400)

The Fairchild Model 3400 Lever Operated Pressure Regulator is designed as the combination of a Model 1000 High Flow Pressure Regulator and a hand held operated lever mechanism with 120 degree maximum travel. The Model 3400, offered in four (4) different pressure ranges, is recommended for use in systems requiring the execution of hand operated pressure control such as the control of a throttle in an engine or engine room. The regulator is the logical choice for rapid, "hands on" control in a variety of applications, including construction machinery, industrial and oil rig equipment, and cylinder operation.

Low Pressure Regulator (M4100A)

The Fairchild Model 4100A is a No Bleed Low Pressure Precision Pressure Regulator designed for applications that require high performance and accurate process control at very low pressures. The Fairchild Model 4100A features control sensitivity of less than 0.05" water column to maintain your desired set point. The Fairchild Model 4100A pressure regulator will handle a 150 psi, 10 BAR maximum supply pressure and offers three (3) output pressure ranges from 0-.07 psi, 0-0.048 BAR, 0-4.8 kPa up to 0-5 psi, 0-0.35 BAR, 0-35 kPa. The Model 4100A has a flow capacity of up to 30 SCFM, 51m3/hr.

Precision Stainless Steel Fuel Control Regulator (M67)

All New M67 Stainless Steel Fuel Control Regulator offers high accuracy, low droop, and corrosion resistance for all fuels and mixtures. Optional quick fuel changeover and internal purge capability. Pressure ranges from -6 to 45 psi.